^{Product Description}

^{This drone has the capability to fly either freely or be tethered to a MYUAV tether station.
Tethered drones are often used for various applications such as surveillance, monitoring, and inspection where stable and secure flight is required for an extended period of time. The tether station provides power and data transfer to the drone while it is in flight.}

^{A tethered drone system typically consists of a drone that is connected to a base station via a tether (a strong cable). The base station provides power to the drone and may also facilitate data transfer and communication between the drone and the ground station. Tethered drone systems have a few advantages over traditional free-flying drones, such as extended flight times, increased stability in windy conditions, and the ability to operate in restricted airspaces.}

To use a tethered drone system, follow these general steps:

<sup>1. **Preparation:**
- Ensure you have a tethered drone system, which includes the drone, a tether cable, a tether launch and recovery system, and a ground station.
- Charge the drone's batteries and the tether launch and recovery system if necessary.
- Inspect the tether cable for damage and ensure it is within the maximum length specification for your drone.</sup>

<sup>2. **Setup:**
- Set up the drone in a safe area, away from obstacles and people.
- Position the tether launch and recovery system nearby, ensuring it is on flat ground and that the tether winch is properly secured.
- Attach one end of the tether cable to the drone and the other end to the launch and recovery system.</sup>

<sup>3. **Battery Check:**
- Check the drone's battery level to ensure it has enough charge for the intended flight.</sup>

<sup>4. **System Check:**
- Power on the drone and the ground station.
- Perform a systems check to ensure all systems are functioning correctly, including the communication link between the drone and the ground station.</sup>

<sup>5. **Flight Modes:**
- Depending on your drone's capabilities, select the appropriate flight mode tethered operation. Some drones have a dedicated tethered flight mode.</sup>

<sup>6. **Takeoff:**
- Initiate the takeoff command from the ground station or through the drone's controller.
- The drone will begin to ascend, pulling the tether cable out of the launch and recovery system.</sup>

<sup>7. **Flight Operation:**
- Once the drone is airborne, you can operate it using the ground station's controls to navigate and manipulate the camera or other payloads.
- Monitor the drone's status, including battery life, altitude, and any telemetry data provided by the system.</sup>

<sup>8. **Landing:**
- When it's time to land, instruct the drone to descend using the ground station controls.
- The drone will lower itself back onto the tether and gradually slow down until it is safely on the ground.</sup>

^{9. **Recovery - If the drone is unable to land safely due to a power failure or other issue, the tether will bring it back to the ground relatively gently. - Use the recovery system to secure the tether and retrieve the drone.}

^{10. **Shutdown:** - Power off the drone and the ground station. - Store the drone and tether cable in a safe place when not in use.}

Drone technical parameters table

OUR ADVANTAGES:

^{1. It has automatic break-point memory. It can memory the position automatically when then pesticide was finished.Make sure the continuities of spraying.}

^{2.Automatic action mode. One key taking off, One key back landing.}

^{3. Flying as the planing route.}

^{4. Powerful and long-life pump, better atomization function with big pressure.}

^{5.Rtk technology, fixed position accurately . And integrate GPS,Beidou,Glonass
position systems to make more safety work.}

^{6. Quick released structure, easy to maintain and easy to transport.}

^{7. Excellent black box function,automatically record the flight data.}

^{8. Six levels of wind resistance,rain proof,dust proof.}

^{9. Brushless motor, long-life and easy to maintain. 8 points positioning,stable taking-off.}

FAQ:

Q1. Are you a sprayer drone factory?

A1: Yes, we are a professional manufacturer of sprayer drones.

Our main products are agricultural sprayer drones and spreader drones. thermal fogger drones, biological control drones.

Q2. Is the UAV sprayer drone ready to fly?

A2: Yes. Before dispatch, JOYANCE assembles all the parts and set all the parameters. Every drone is 100% flight tested and has strict quality control.

Q3. What`s your MOQ for an agricultural drone?

A3: MOQ ≥1. More than 100 units of order is available. Besides, we are looking for dealers and agents all over the word. Welcome to contact us for more details.

Q4. What`s the delivery time of the sprayer drone?

A4: 7 days for one, please contact us for mass order.

Q5. What`s your payment term?

A5: 50% payment as deposit, balance before delivery.

Myuav's products are mainly used in tethered lighting, communication relay, environmental monitoring, and other fields. In the domestic market, the company has accumulated a large number of customers, including leading companies in the power, communication, environmental protection industries, and has obtained more than ten patent authorizations.

In the international market, we have established long-term cooperative relationships with multiple overseas companies and has conducted business in Europe, the Middle East, America and other regions.

MYUAV aims to build solid products and services, committed to providing high-standard tethered drone system solutions for global customers.